5 files changed, 50 insertions, 8 deletions
diff --git a/machines/iso/configuration.nix b/machines/iso/configuration.nix
index ee400d3..29b429a 100644
--- a/machines/iso/configuration.nix
+++ b/machines/iso/configuration.nix
@@ -1,4 +1,7 @@
 { ... }: {
+  imports = [
+    ./hardware-configuration.nix
+  ];
   nixpkgs = {
     config.allowUnfree = true;
   };
diff --git a/machines/iso/hardware-configuration.nix b/machines/iso/hardware-configuration.nix
new file mode 100644
index 0000000..78601ad
--- /dev/null
+++ b/machines/iso/hardware-configuration.nix
@@ -0,0 +1,35 @@
+# hardware-configuration.nix
+
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports =
+    [ (modulesPath + "/installer/scan/not-detected.nix")
+    ];
+
+  boot.initrd.availableKernelModules = [ "xhci_pci" "usbhid" ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ ];
+  boot.extraModulePackages = [ ];
+
+  fileSystems."/" =
+    { device = "/dev/disk/by-label/NIXOS_SD"; # this is important!
+      fsType = "ext4";
+      options = [ "noatime" ];
+    };
+
+  swapDevices = [ ];
+
+  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+  # (the default) this is the recommended approach. When using systemd-networkd it's
+  # still possible to use this option, but it's recommended to use it in conjunction
+  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+  networking.useDHCP = lib.mkDefault true;
+  # networking.interfaces.end0.useDHCP = lib.mkDefault true;
+  # networking.interfaces.wlan0.useDHCP = lib.mkDefault true;
+
+  nixpkgs.hostPlatform = lib.mkDefault "aarch64-linux";
+}
diff --git a/machines/khad/default.nix b/machines/khad/default.nix
index f28fdbe..cd6f22f 100644
--- a/machines/khad/default.nix
+++ b/machines/khad/default.nix
@@ -33,6 +33,7 @@
     };
     kernelPackages = pkgs.linuxPackages_latest; # use latest kernel
   };
+  boot.binfmt.emulatedSystems = ["aarch64-linux"];
   hardware.onlykey.enable = true;
 
   networking.hostName = "khad"; # Define your hostname.
diff --git a/machines/picast/default.nix b/machines/picast/default.nix
index e99a15b..bf0beac 100644
--- a/machines/picast/default.nix
+++ b/machines/picast/default.nix
@@ -12,7 +12,7 @@
       ../../modules/nixos/nix-common.nix
       ../../modules/nixos/environment.nix
       ../../modules/nixos/tailscale.nix
-      ../../modules/nixos/cgit.nix
+      # ../../modules/nixos/cgit.nix
       ../../modules/nixos/system-packages.nix
       ../../modules/users/defin.nix
       ../../modules/users/root.nix
@@ -23,13 +23,13 @@
   # Enables the generation of /boot/extlinux/extlinux.conf
   boot.loader.generic-extlinux-compatible.enable = true;
 
-  # networking.hostName = "nixos"; # Define your hostname.
+  networking.hostName = "picast"; # Define your hostname.
   # Pick only one of the below networking options.
   # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
   # networking.networkmanager.enable = true;  # Easiest to use and most distros use this by default.
 
   # Set your time zone.
-  # time.timeZone = "Europe/Amsterdam";
+  time.timeZone = "America/Denver";
 
   # Configure network proxy if necessary
   # networking.proxy.default = "http://user:password@proxy:port/";
@@ -70,7 +70,7 @@
 
   # Some programs need SUID wrappers, can be configured further or are
   # started in user sessions.
-  # programs.mtr.enable = true;
+  programs.mtr.enable = true;
   # programs.gnupg.agent = {
   #   enable = true;
   #   enableSSHSupport = true;
@@ -106,7 +106,7 @@
   # and migrated your data accordingly.
   #
   # For more information, see `man configuration.nix` or https://nixos.org/manual/nixos/stable/options#opt-system.stateVersion .
-  system.stateVersion = "24.05"; # Did you read the comment?
+  system.stateVersion = "24.11"; # Did you read the comment?
 
 }
 
diff --git a/machines/picast/hardware-configuration.nix b/machines/picast/hardware-configuration.nix
index 3f13493..78601ad 100644
--- a/machines/picast/hardware-configuration.nix
+++ b/machines/picast/hardware-configuration.nix
@@ -1,3 +1,5 @@
+# hardware-configuration.nix
+
 # Do not modify this file!  It was generated by ‘nixos-generate-config’
 # and may be overwritten by future invocations.  Please make changes
 # to /etc/nixos/configuration.nix instead.
@@ -8,14 +10,15 @@
     [ (modulesPath + "/installer/scan/not-detected.nix")
     ];
 
-  boot.initrd.availableKernelModules = [ ];
+  boot.initrd.availableKernelModules = [ "xhci_pci" "usbhid" ];
   boot.initrd.kernelModules = [ ];
   boot.kernelModules = [ ];
   boot.extraModulePackages = [ ];
 
   fileSystems."/" =
-    { device = "/dev/disk/by-uuid/44444444-4444-4444-8888-888888888888";
+    { device = "/dev/disk/by-label/NIXOS_SD"; # this is important!
       fsType = "ext4";
+      options = [ "noatime" ];
     };
 
   swapDevices = [ ];
@@ -25,7 +28,7 @@
   # still possible to use this option, but it's recommended to use it in conjunction
   # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
   networking.useDHCP = lib.mkDefault true;
-  # networking.interfaces.enu1u1.useDHCP = lib.mkDefault true;
+  # networking.interfaces.end0.useDHCP = lib.mkDefault true;
   # networking.interfaces.wlan0.useDHCP = lib.mkDefault true;
 
   nixpkgs.hostPlatform = lib.mkDefault "aarch64-linux";